Cable Clip & Wire Management — STL Pack

Tidy any desk, bench or robot wiring run with five real, measured STL files (every mesh watertight and manifold-checked). cable_clip_3mm.stl — 21.0 x 10.0 x 6.4 mm arch clip for 3 mm cable (inside arch 3.8 mm, wall 1.6 mm, 2 mm flat base, one 3.4 mm M3 screw hole; the flat base also works with foam tape). cable_clip_5mm.stl — 23.0 x 12.0 x 7.9 mm, same design for 5 mm cable (inside arch 5.8 mm). cable_clip_8mm.stl — 26.0 x 15.0 x 10.2 mm, for 8 mm cable (inside arch 8.8 mm). cable_saddle_bridge.stl — 48.0 x 18.0 x 15.0 mm bridge saddle with an 18 x 9.5 mm tunnel for cable bundles and two 3.4 mm screw holes. desk_grommet_ring_and_cap.stl — two parts side by side (combined 128.0 x 62.0 x 15.0 mm): a ring with a 62 mm flange and 49.5 mm barrel that fits a 50 mm desk hole (inside 44 mm), plus a 50 mm cap with a push-in plug and a 20 x 7 mm cable slot.

Exact contents: the 5 STL files above, README.md with print settings and the hardware list, and LICENSE.txt (single-buyer use license).

Print settings: PETG preferred for the clips, PLA fine for the saddle and grommet; 0.2 mm layers, 3 walls, 20–30% infill. No supports — every part prints flat side down as oriented.

Instant download — your file is available right after checkout from your account. No shipping, no waiting.
What's included

• cable_clip_3mm.stl — 21.0 x 10.0 x 6.4 mm clip for 3 mm cable
• cable_clip_5mm.stl — 23.0 x 12.0 x 7.9 mm clip for 5 mm cable
• cable_clip_8mm.stl — 26.0 x 15.0 x 10.2 mm clip for 8 mm cable
• cable_saddle_bridge.stl — 48.0 x 18.0 x 15.0 mm bridge clip, 18 x 9.5 mm tunnel
• desk_grommet_ring_and_cap.stl — ring (62 mm flange, fits 50 mm desk hole) + slotted cap
• README with print settings
• Requires: a 3D printer and filament — this is a digital file, no physical item ships
• Instant download after checkout — no shipping
• Quality-checked by MarketplacePlanet before listing
• Free re-downloads for 30 days from your account

Free sample: Download the free sample before you buy.